This article mainly introduces:

Turkey hydraulic cylinder,tension cylinder manufacturer,tension cylinder

(Turkey tension cylinder,produced by Hebei Hengyu company）

tension cylinder are widely used in Turkey，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed tension cylinder for customers from Turkey.

Introduction to tension cylinder:

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular tension cylinder action. Troubleshooting method: Replace the rubber hose.

The tension cylinder body is commonly made of No. 20, 35, 45 seamless steel pipe, and the steel pipe is honed or rolled to achieve the roughness requirement within 0.4μm. The low pressure tension cylinder can use 20 steel pipe, and the high pressure tension cylinder can use 45 steel pipe.

The definition of the minimum starting pressure of the tension cylinder refers to the minimum working pressure of the tension cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the tension cylinder parts and the size of the sealing friction.

The commonly used buffer structure of the tension cylinder is composed of a piston boss and a tension cylinder head groove. When the piston moves close to the tension cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

Answers to some questions about tension cylinder:

What is the cylinder with rod cavity, what is the rodless cavity.
The rod cavity is the end of the piston rod, the rodless cavity is the end without the piston rod.

In hydraulic equipment, is the motor power related to the cylinder pressure holding time?
Irrelevant. The motor only drives the plunger in the hydraulic cylinder of the oil pump to extend out, and stops when the set pressure is reached; The length of the pressure holding time is related to the sealing degree of the hydraulic cylinder and the solenoid valve.