This article mainly introduces:

Ecuador hydraulic cylinder,hydraulic forklift cylinder manufacturer,hydraulic forklift cylinder

(Ecuador hydraulic forklift cylinder,produced by Hebei Hengyu company）

hydraulic forklift cylinder are widely used in Ecuador，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed hydraulic forklift cylinder for customers from Ecuador.

Introduction to hydraulic forklift cylinder:

When the hydraulic forklift cylinder is in use, ensure that the hydraulic forklift cylinder and the surrounding environment should be clean. The tank should be sealed to prevent contamination. Pipelines and fuel tanks should be cleaned to prevent falling off the oxide sheet and other debris. Clean with lint-free cloth or special paper. Twine and binder should not be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When there is no load, unscrew the exhaust bolt for exhaust.

When installing the piston rod, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the hydraulic forklift cylinder head adn the earring (or the middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent the phenomenon of rigid interference and causing unnecessary damage.

There are some honeycomb holes in the inner wall of the hydraulic forklift cylinder, piston or piston rod surface. How is this formed? When we repair the hydraulic forklift cylinder, we can see that there are some honeycomb holes on the inner wall of the hydraulic forklift cylinder, the piston or the piston rod surface, which are caused by cavitation. Therefore, the cavitation of the hydraulic forklift cylinder is targeted to prevent. Is very necessary.

The main role of the hydraulic forklift cylinder: the hydraulic forklift cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the hydraulic forklift cylinder realizes reciprocating motion. The structure of the hydraulic forklift cylinder has three categories: piston hydraulic forklift cylinder, plunger hydraulic forklift cylinder, swing hydraulic forklift cylinder, piston hydraulic forklift cylinder and plunger hydraulic forklift cylinder to achieve reciprocating linear motion, output speed and thrust, swing hydraulic forklift cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the hydraulic forklift cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The hydraulic forklift cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about hydraulic forklift cylinder:

How to distinguish loader boom and forearm hydraulic cylinder? Is it the upper arm or the lower arm?
The one in the middle that can flip the bucket is the small arm cylinder you say, and the one that lifts the brackets (big arms) on both sides is the big arm cylinder.

Where is the tension cylinder used in the excavator?
Get off the inside of the frame, behind the guide wheel (steering wheel, guide wheel). Disassemble the track and take the guide wheel out to see the tensioning cylinder (track spring).