This article mainly introduces:

Bangladesh hydraulic cylinder,reciprocating cylinder manufacturer,reciprocating cylinder

(Bangladesh reciprocating cylinder,produced by Hengyu Hydraulic Co., Ltd）

reciprocating cylinder are widely used in Bangladesh，because of clever hydraulic energy conversion，no transmission clearance，powerful torque.So our company has designed reciprocating cylinder for customers from Bangladesh.

Introduction to reciprocating cylinder:

The material of the sliding part of the reciprocating cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

If it is found that the reciprocating cylinder lubrication is poor or the reciprocating cylinder bore processing is abnormal, it is necessary to feedback the situation to the manufacturer, because the piston and the reciprocating cylinder, the guide rail and the piston rod have relative movement, if the lubrication is poor or the reciprocating cylinder bore is abnormal, it will aggravate the wear and reduce the straightness of the reciprocating cylinder center line. In this way, when the piston works in the reciprocating cylinder, the friction resistance will be large and small, resulting in slip or crawling. The solution is to repair and grind the reciprocating cylinder first, and then prepare the piston according to the matching requirements, repair and grind the piston rod, and configure the guide sleeve.

Before purchasing the reciprocating cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

The reciprocating cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

Answers to some questions about reciprocating cylinder:

Where is the cylinder used? What is it used for? Can it be used in cars?
Cylinders can be used as actuator in hydraulic system. Such as hydraulic jacks, dump truck box lifting device, dodging (snow) machine loader bucket lifting device. Hydraulic cylinders are also widely used in car cranes. It's all about cars.

Hydraulic cylinder performance requirements?
Hydraulic cylinder performance requirements: hydraulic cylinder is the hydraulic system to achieve energy transfer, conversion and control of the working medium, in addition, it is also responsible for the lubrication of the system, rust prevention, corrosion prevention and cooling. The performance of hydraulic oil will make the system flexible, accurate and reliable. Hydraulic performance requirements are determined according to the design parameters of the hydraulic system, operating conditions, the structure of the hydraulic pump and the working environment. Appropriate viscosity and good viscosion-temperature performance Viscosity is an important performance indicator of hydraulic pressure, which has an important impact on the smooth operation of the hydraulic system and the friction parts. The low temperature performance of hydraulic oil includes three aspects: low temperature flow, low temperature start-up and low temperature pumping.