This article mainly introduces:

Bangladesh hydraulic cylinder,push plate cylinder manufacturer,push plate cylinder

(Bangladesh push plate cylinder,produced by Hengyu Group）

push plate cylinder are widely used in Bangladesh，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed push plate cylinder for customers from Bangladesh.

Introduction to push plate cylinder:

push plate cylinder piston rod material introduction: In general, we use 45 steel to produce push plate cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

Disassembly push plate cylinder: When disassembly push plate cylinder, strictly prevent damage to the screw thread at the top of the piston rod, the screw thread of the push plate cylinder head and the surface of the piston rod. It should also be noted that the piston cannot be played out from the push plate cylinder.

If the push plate cylinder slips or crawls, please check whether there is astringency inside the push plate cylinder, because the internal parts of the push plate cylinder are improperly assembled, the parts are deformed, worn or the shape and position tolerance is excessive, the action resistance is too large, so that the piston speed of the push plate cylinder changes with the different stroke position, and the slip or crawl occurs. Most of the reasons are due to poor assembly quality of parts, surface scars or sintered iron filings, so that the resistance increases, the speed decreases. For example, the piston is different from the piston rod or the piston rod is bent, the push plate cylinder or the piston rod is offset from the mounting position of the guide rail, and the sealing ring is too tight or too loose. The solution is to repair or adjust, replace damaged parts and remove iron filings.

push plate cylinder piston sealing is best to use Yx ring, polyurethane and polytetrafluoroethylene sealing material combination, can significantly improve the sealing performance: (I), reduce friction resistance, no crawling phenomenon; (ii) Have good dynamic and static sealing, wear resistance, long service life; (iii) The installation groove is simple, and the disassembly is simple.

Answers to some questions about push plate cylinder:

Cylinder la-50-70st What does that mean?
Full model should be CX-LA-50-70ST, thin block cylinder, radial mounting, bore 50, stroke 70.

Why the cylinder cannot operate normally after the explosion-proof valve is installed?
The pipeline explosion-proof valve is specially designed to prevent pipeline damage and free fall of the cylinder, so there must be back pressure to open. If there is no oil return pressure, or the oil return pressure is too small, and can not adjust the oil return pressure, such a system with explosion-proof valves is more troublesome, it is recommended to add a one-way throttle valve between the cylinder and the tank to establish back pressure. If you understand the explosion-proof valve, you can also try to adjust the opening of the valve (that is, the flow of the regulating valve), and adjust the opening to help the valve to open.