This article mainly introduces:

Thailand hydraulic cylinder,loading cylinder manufacturer,loading cylinder

(Thailand loading cylinder,produced by Hebei Hengyu company）

loading cylinder are widely used in Thailand，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed loading cylinder for customers from Thailand.

Introduction to loading cylinder:

The oil loading cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.

There are some honeycomb holes in the inner wall of the loading cylinder, piston or piston rod surface. How is this formed? When we repair the loading cylinder, we can see that there are some honeycomb holes on the inner wall of the loading cylinder, the piston or the piston rod surface, which are caused by cavitation. Therefore, the cavitation of the loading cylinder is targeted to prevent. Is very necessary.

The loading cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the loading cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the loading cylinder wall due to the stiffness and the weight of the parts, causing scars.

The coordination of the sliding parts of the loading cylinder itself should not be too tight, the sealing friction force should not be too large, and H8 / f8 coordination should be selected between the piston rod and the guide sleeve; Check whether the size of the sealing ring is processed strictly according to the standard; If the V-shaped sealing ring is used, the sealing friction should be adjusted to a moderate degree.

Answers to some questions about loading cylinder:

How to exhaust hydraulic cylinder?
Exhaust: The hydraulic system generally does not have exhaust, the use of the tank can exhaust, the oil operation will bring the gas back to the tank, and the tank can be communicated with the atmosphere. The gas will escape from the oil.

The hydraulic cylinder is slow when moving forward and faster when moving back.
If the cylinder is single, it is slow when it is moving forward without the rod cavity, and fast when it is shrinking.